Видео

Really good, informational, excellent presentation. Well worth the time to watch. Good job!

How do you orient the bulb correctly!?

Not for $1,000!!

If we use 55w ballast on a 35w bulb will it reduce the life of the bulb

Very nicely made and I applaud your thorough efforts but after repeated examples of why this one doesn’t work and why that one would not be good…on and on over and over - I’m begging for some simple suggestion for fraks’s sake. So i jumped about four minutes of the video and not really sure what you recommend which means I call you and you tell me and sell me based on your expertise. I hope that’s the case. But wait, I’m a die hard diy guy so hesitate…and then realize how much time I’m wasting with this so okay. I’ll go to your site and let you tell me. Thank you.

i hate that people buy these not knowing you’re supposed to have a pattern and think they are good, then they just go out and blind everyone 🤦🏽

LED bulbs are NOT LEGAL, none are DOT approved, nor are they designed to be used in older headlamps as they can't be aligned properly! They generally say FOR OFF ROAD USE ONLY to skate the legal ramifications. Message to anyone with these coming at you on the road, return the favor and put your high beams on and blind them until they drive by.

LED bulbs are NOT LEGAL, none are DOT approved, nor are they designed to be used in older headlamps as they can't be aligned properly! They generally say FOR OFF ROAD USE ONLY to skate the legal ramifications. Message to anyone with these coming at you on the road, return the favor and put your high beams on and blind them until they drive by.

recommendations for a 94 Camry?

You never installed the adjustment spring between the two pieces, I thought I was adjusting when turning screw. I was wondering why I kept getting flashed. Thanks

What lighting can I put on my 2002 tundra

The front side marker portion is a bit mis-leading. My C6 (2012) has panels in the front. There is no just reaching behind the fender/tire and pushing out the old marker. It will need to be pried out.

Hi Chris the H7 Mini Led Headlight Bulbs that I brought on AliExpress by mistake as I really need 9006 Led Headlight Bulbs I apparently brought a 9006 Led Headlight Bulb Adapters & they wouldn't fit the PT Cruisers Headlight Housings as the Adapters were very small & my younger son Brannon he has a 3 D printer & measured up my original 9006 Adapters of the PT Cruiser Headlight Housing & made them up for me so I could use them with the H7 Led Headlight Bulbs in the PT Cruiser on & the centre of the H7 Led Headlight Bulbs & they work perfectly in the PT Cruiser & the 3 very small led Chips on each side of these H7 Led Headlight Bulbs all linee up perfectly with the H7 Halogen Headlight bulbs on low beam & I now have excellent Led Headlighting Beams work perfectly With these H7 led headlight bulbs & beautifully designed H7 Led Headlight Bulbs & I'm really like the 6000K bright white Light with the with pt Cruiser headlight Housings & they are really work Great & I have a pair of 9005 Led Headlight Bulbs & the original on Adapters on thes 9005 Bulbs will all look great on the Pt Cruiser as well Kind PeterC Morton

The 3.0 ring snapped inside of my headlight housing… but I might just give them another chance with this one

does this applicable to 2012 xterra?

Try the VLEDs v50 h4 in the halogen headlight 👍

Pink better 😂good video 😊

Agree LEDs are still not mature enough for better beam pattern and have short range, also affected by poor weather conditions

I'm seeking an upgrade of my 2023 Colorado AMBER LEDs not the bright white LED Lamps to better cut through the fog not to direct reflect back off the fog at me. Also looking for LED Brake lights for the same truck. I already replaced the backup lights with the LASFIT LED LAMPS T-T25, and the LASFIT LED LAMPS T3-74430 as LED front white running lamps w/Switchback amber turn signals, which I recommend these two types.

I have a question. What if you have stock headlights without a DRL led strip at the bottom and want to put the OEM headlights that have an LED drl at the bottom but is still a stock halogen?

Is there a video showing how to put these HID kits into the Alpharex housing?

I just got that the other day the month of waiting is worth it

I’m looking for a light pattern for installing on my A-Pillars of a 2023 F-150. I want the dark shoulders of the highways at night to be covered in light while driving. What beam pattern should I go for ?

Just broke my mirror

Are these brighter than the factory HIDs with Osram bulbs? I wish you had tested both OEM halogens and HIDs... Based on other testing I've seen on your channel, some HID bulbs get much brighter than the 570 max lux on these XBs. Is there something I'm missing? Do the LEDs have a wider hot spot or something that makes them more useable than HIDs, or are the HIDs better? Or does this kit not work at all with Yukons with factory HIDs? Really interested to know the answer to this.

Hey guys sounds like you guys really know what your talking about with lights. I have been looking for a LED replacement for my Halogen stock bulbs. I haven't found many up to date videos and I know how technology is these days it moves so fast if you find a year old video there is almost always newer and better options out there. Would you have any suggestions for an LED replacement for my 2004 Chevy Trailblazers 9005 9006 Bulbs? thank you for your content and any suggestions you might give.

Thank you for the video. Very informative. Is there any danger to replacing a T10 5W halogen bulb with a T15 12W LED bulb? My car's lamp housing has space for the larger T15 bulbs, but I am worried the socket and/or wires cannot withstand the higher wattage.

I tried today to install the 42” on my 2021 Tundra but even after I tightened everything, it still had some play when I lightly pushed on the light bar. Only two hex bolts holding it in place. Just scared it’s going to rattle (break) or wear my paint out. Any suggestions or fixes to this problem as I am surely not the only person to have this.

Damn this shits expensive yall got a discount code I could use. 😅

I'd like to see the new Baja designs SAE. Most tests seem to be on the gen 1 version.

This might be the best video for buying headlights I’ve ever seen but I’m still so confused on which to get 😂

thank you for sharing very good information about LED Lights Love it. But i am using Novsight N60....

thanks for sharing this! ordered upgrades

How can I close the fuse box I just can’t close it

he is good at explaining,but i use LED lights in all my cars,i have one brand i get and they never let me down,Halogen's now are not bright do to some kind of environmental thing,the road i take to work i need to see and LED are my choice.

Cool the ones that are worth are way past my budget very nice lol

Forgot the license plate lights.

OMG! This up front tip for those who don't want to wait is awesome. I've never seen a RUclipsr does that before. I watched the whole vid tho

What's the bulb size?

Advisable to remove the cutoff guard?

Web site Is dead ?😢

Do they have this for a 2009???

The holley is the only possible choice for a stock type build old car. The others may look cool on highly modified cars but they look like garbage on stock type builds.

What car is that? A bronco?

I put a set of Alpha Rex on my daughter Gen 1 Raptor and burned through 2 sets in like 2 months....Junk!

I'm looking to retain a more warm colored light for my vintage vehicle. All the cool lights don't allow the vehicle to maintain it's traditional look. What's the best way to find a "new" bulb that's in the 3125k range vs. all these "cool" temp bulbs.

Nice video. Is there a way to know if I need the interface or not? 2016 GMC Yukon XL Denali :: HID :: 6.2L. The fog lights are atrocious dingy yellow. And I am pretty sure that my iPhone 15 has a brighter light than my backups.

Hi Chris I have received the Led Headlight Bulbs & has 3 very small Led Chips on each side of the bulb & the very small Led Chips & the Led Chips are only 2mm wide & has a very small heat sink & has 12,000 RPM Turbo Cooling Fan & the very small driver is only 42mm long & 22mm wide & the wires are completely sealed to the driver & have tested them & really well & very bright lights 6000K & the only thing they don't fit the Headlight 9006 Housing I'm waiting for the 9006 Led Headlight Bulb Adapters & they will fit these Led headlight bulbs & will fit the 9006 Headlight Housing & once I get these 9006 Adapters I will be able to install these Led Headlight Bulbs & I also be later ordering a 9005 Adapters for the high beam Led 899Headlight Bulb 9005 Head Housing & these Led Headlight Bulbs also have 3 very small Led Chips each of the Led Headlight Bulbs & also has a 12000 RPM Turbo Cooling Fan with in line 41mm Long & 25mm wide driver with small heat sinks & I have tested these 9005 Led Headlight Bulbs & these Led Headlight Bulbs are really Bright lights to & they are also 6000K & Im happy with these Led Headlight Bulbs & should really work well once I get these Led Headlight Bulbs installed in the Headlight Housings Kind Regards Peter

Great video! Are the Xenon Depot Extreme DRL LED's still the best choice for the high beam and having a functional DRL? Wanted to know if they still had the top slot for the 4Runner. Thank you!

So do you need a resistor on each turn signal bulb? Because I have two LEDs up front in each housing and I also put LEDs in the rear